
WashUp for express tunnel car washes is an operations app built by car washers. It keeps tunnel equipment on a maintenance schedule, runs Red, Yellow and Green inspections before the first car, puts opening and closing lists on the crew’s phones, and tracks damage claims from the exit lane to Resolved. It’s $109 per location per month for every feature, and the first 14 days are free (WashUp pricing).
An express tunnel is one long line of equipment. When one part of it fails, from the correlator to the last blower, every car behind it waits. We built WashUp because our team spent years working in car washes, living with the clipboards, whiteboards and group texts that were supposed to prevent exactly that (About WashUp).
Use WashUp for express tunnel car washes to fix the problems that come from running a fast, single-line wash on paper and memory. Maintenance slips, the opening list drifts from shift to shift, customers spot a broken applicator before the crew does, and damage claims drag for weeks.
None of these are software problems. They’re the everyday cost of a busy tunnel with a crew that turns over, and they’re why “Built For Car Washers By Car Washers” is more than a tagline to us.
WashUp sets up an express tunnel in My Wash, the map of your site that everything else runs on. The setup wizard has a Tunnel / Express bay type: you tick what’s installed, name it the way your crew talks, and the whole equipment list goes in at once (Use the setup wizard in My Wash).
The list follows the car through the tunnel, group by group: entry and payment, the conveyor, friction wash, high-pressure and touchless, chemical application, rinse, drying, then control and safety. The backroom is its own bay type, with the pump station and the RO system.
Photos can come later. On a phone, Walk & add photos takes you through every item that doesn’t have one yet (Walk your site and add photos). For a finished example, see the tunnel setup example.
A Saturday in the tunnel with WashUp looks like a normal Saturday with fewer surprises. Here’s one, hour by hour.
6:40 a.m. The opener signs in on the shared tablet at the pay station with a 4-digit PIN and works the Opening list: open up the building, check the chemical levels, start the water filtration, run the daily wet down.
7:05 a.m. The tunnel inspection rates the Wrap-Around Brush Yellow, with a photo and a note: cloth fraying on the passenger side. Red is Critical, Yellow needs attention soon, and Green passed. The site manager gets the alert at home and assigns it before the first member pulls in.
10:40 a.m. The grease service on the wraps shows Upcoming, because its reminder went out a week ago. The maintenance tech does it after the lunch rush and marks it complete with a photo.
1:15 p.m. A customer pulls into the vacuums and points at a scuff on her mirror. The attendant opens a new incident on his phone and scans the VIN, then hands her the screen to sign the disclosure. The claim is Under Review before she leaves the lot, and her confirmation email can carry a link to follow it.
Nobody called anybody to find out what happened. That’s the whole point.
The best maintenance tracking software for an express tunnel ties every service to a specific piece of tunnel equipment, reminds the crew before it’s due, flags it Past Due on its own, and saves each completion to that equipment’s history. WashUp’s Services does each of those, and it’s upfront about what it doesn’t do.
The honest limits: Services has no parts inventory or purchase orders, no car-count or usage-based triggers, and no sensors watching the equipment for you. If a manual sets an interval by hours or by car count, set the nearest calendar frequency and adjust it as the equipment’s history fills in. The tunnel services setup example has real ones, like greasing wrap bearings and changing high-pressure pump oil, and our preventative maintenance schedule guide covers the intervals.
WashUp handles tunnel damage claims in Incidents: one claim form, filed from the closest device while the customer is still on the lot, with her signature on the disclosure. Enter a full VIN and the vehicle details fill in on their own; the form also records where the car was damaged and how badly (Incidents).
Every new claim starts Under Review and closes as Resolved or Denied, with the reason and the evidence your company requires. On WashUp, a 14-location tunnel operator cut its median time to close a damage claim from 17.9 days to 2.2, and 74% of its claims now close within a week, up from 26% (customer story). Our damage claims guide walks through the process step by step.
WashUp keeps a tunnel crew consistent by putting the same lists, the same schedule and the same conversation on every phone. Opening and Closing lists show up on their own each day, with time frames like “Due by: 9:00 AM - 11:00 AM” where the timing matters. A task can repeat through the day, the way the help center’s hourly restroom check runs from 8 to 6 (Set a task to repeat through the day).
New locations start with Opening and Closing shift types in the Employee Scheduler, and your team doesn’t see the week until you publish it. With Chat, each location also gets its own conversation, so the photo of a jammed roller goes to the people working that tunnel instead of a group text with the whole company. It matters for revenue, too: when your crew is the membership desk, a consistent wash is what they’re selling.
WashUp doesn’t run your tunnel. It doesn’t connect to your tunnel controller or your POS, and it doesn’t sell or manage memberships. It doesn’t track hours or run payroll either. No, and that’s intentional: WashUp handles what happens inside the wash, and your POS keeps selling it.
WashUp fits beside the tunnel controller and the POS you already run. Onboarding is free, and we do most of the work: we bring over the checklists and inspections you already use and help you build your tunnel in My Wash (Ask us to load a template). Pricing is per location with unlimited users. If your current setup already does all of this and your crew likes it, we’re probably not the right fit. If it lives on a whiteboard in the backroom, it’s worth a look.
See your tunnel in WashUp. Book a demo and we’ll set it up around your equipment.
No. WashUp doesn’t integrate with tunnel controllers or car wash POS systems. You list your tunnel equipment in My Wash, from the pay station and the correlator to the blowers, and WashUp runs your inspections, maintenance, checklists and damage claims alongside the systems you already use. Your POS keeps selling the wash; WashUp helps your crew deliver it.
Yes. In Services, every job is tied to one piece of equipment, like a Wrap-Around Brush, and repeats weekly (every 1 to 12 weeks on the days you pick), monthly or yearly. A reminder goes out 1 to 30 days before it’s due, the service turns Past Due on its own if it’s missed, and each completion lands in that equipment’s history.
WashUp is priced per location, with unlimited users. The Bundle plan is $109 per location per month for every feature, and single modules run $15 to $30 per location per month. The first 14 days are free, there are no setup fees, and annual plans take 5% to 20% off depending on how many locations you run.
Yes. Location Login signs a shared tablet in once as the location, and each crew member picks their name and enters a 4-digit PIN, so every completed task and inspection is logged under the right person. When a shift ends, they sign out and hand the tablet to the next person.